Database failure

You are here:

CEMAG HIGH EFFICIENCY CROSS FLOW-CLASSIFIER

DIFFERENT FROM THE REST

Based on the most recent findings and requirements of the manufacturing industry our engineers and technicans launched the 3rd classifier generation of a High Efficiency Cross Flow-Classifier type with most distinctive qualities.



                        


SPECIAL ADVANTAGES

  • Deagglomeration system
  • Flying suspension of cage rotor, short shaft
  • Symmetric geometry of fineness regulation blades, screwed together
  • Special cage sealing without sealing air
  • Separate angle adjustment of air guide vane
  • Stepless adjustment of air flow
  • Stepless adjustment of cage speed
  • Cooling by recirculated air or partial air-flow mode
  • Stepless installations sizes
  • Partial loads possible
  • Low power requirement
  • Wear-optimised design
  • High availability
  • High economic efficiency

FUNCTIONAL PRINCIPLE

The material is ideally dispersed in a multistage dispersing disk system and distributed evenly in the air stream at the separation zone, around the rotor.

In the classifying zone the material is affected by centrifugal-, drag- and flow forces. Depending on cage rotor speed, air quantity and air guide vane positioning, the material is separated into fine and coarse material.

The fine material is separated from the air in a cyclone or filter. The coarse material is descharged into a coarse material collection cone.



Further information on
CEMAG High Efficiency Cross Flow-Classifier you will find here:
                                                                                         

Deutsch english french spanisch 

© 2009 CMP AG All rights reserved. / / powered by dev4u® - CMS